Avaya CallPilot 201i, Установка оборудования, Страница: 31 / 134

Step Description Check
NTRH1408 and NTRH1410. See Installing the SCSI cables
for Meridian 1 on page 51.
• For Option 11C, you require two cables to complete the
connection between the 201i server and the SCSI device:
NTRH1407 and NTRH3502. See
Installing the intermediate
SCSI cable for Option 11C on page 60.
• For Option 11C Mini or Communication Server 1000, you
require one cable to complete the connection between the
201i server and the SCSI device: the NTRH3502 cable that is
provided in the CD-ROM and tape drive kits. See the
following:
- Option 11C Mini: Installing the NTRH3502 SCSI cable for
Option 11C Mini on page 65
- Communication Server 1000: Installing the NTRH3502
SCSI cable for Communication Server 1000 on page 85
5 Set the DIP switches on the modem (see Setting the modem
DIP switches on page 96).
6 Set the following:
• SCSI IDs on the CD-ROM and tape drives (see pages Setting
the CD-ROM drive SCSI ID and DIP switches on page 98
and Setting the tape drive SCSI ID on page 100)
• DIP switches on the CD-ROM drive (see Setting the CD-
ROM drive SCSI ID and DIP switches on page 98)
• device termination on the CD-ROM and tape drives (see
Setting SCSI device termination on page 101)
7 Insert the 201i server into two consecutive slots inside the
switch. For instructions, see:
• large Meridian 1 systems, such as Option 51C (see Installing
the 201i server in the large Meridian 1 switch on page 43)
• Option 11C or Option 11C Mini (see Installing the 201i server
in the Option 11C or Option 11C Mini switch on page 57)
• Communication Server 1000 (see Installing the 201i server on
page 82)
8 Install the MPC cards, if required (see Installing the MPCs on
page 110).
9 Connect the 201i server and devices as follows:
Connect the monitor, keyboard, and mouse to the 201i server
faceplate (see
Installing the monitor, keyboard, and mouse on
page 113).
Installation checklist
Avaya CallPilot
®
201i Server Hardware Installation December 2010 31