Avaya CallPilot 201i, Установка оборудования, Страница: 35 / 134

You must install the 201i server in two peripheral equipment slots as follows:
Switch Slots
Meridian 1 tiered systems 0 through 14
Ensure that both slots have electrical backplane connectivity.
Option 11C 1 through 9 in any Option 11C cabinet
Option 11C Mini A pair of consecutive slots in any cabinet
Note:
You cannot install the 201i server in slots 0 or 4 because
these slots are dedicated to other cards. For more
information about cards and slots, refer to the Option 11C
Mini documentation.
Communication Server
1000 A pair of consecutive slots in any Media Gateway or Media
Gateway Expansion.
Note:
The 201i server cannot be installed in slots 0 or 4, because
these slots are dedicated to other cards. For more
information about cards and slots, refer to the
Communication Server 1000 Planning and Installation Guide
Meridian 1 I/O panel connections
On large Meridian 1 systems (such as Option 51C), the 201i server requires two connections
from the slots to the I/O panel on the rear of the switch, as follows:
• One connection is for the multi I/O cable.
This connection corresponds to the left slot (when viewing the front of the Meridian 1
switch).
• The other connection is for the external SCSI device.
This connection corresponds to the right slot (when viewing the front of the Meridian 1
switch).
For information about slot and rear bulkhead wiring, refer to the Meridian 1 System Installation
and Maintenance Guide
Meridian 1 I/O panel connections
Avaya CallPilot
®
201i Server Hardware Installation December 2010 35