Avaya CallPilot 201i, Установка оборудования, Страница: 29 / 134

Chapter 3: Preparing for installation
In this chapter
Installation overview on page 29
Unpacking and inspecting the 201i server on page 32
Switch and network requirements on page 34
Installation overview
Introduction
This section provides a high-level overview of the requirements and procedure for installing
the 201i server.
Before you begin
Ensure that proper power and grounding are available for all the power outlets serving the
Avaya CallPilot
®
server and its associated peripherals. Power for these devices must be wired
and fused independently of all other receptacles and referenced to the same ground as the
PBX system.
A qualified electrician must implement the single-point ground reference as required between
the power outlets of the Avaya CallPilot server and the power outlets of the switch.
Provide a sufficient number of properly grounded power outlets or power bars for all equipment.
For more information, refer to Chapter 2, "Grounding and power requirements", in the CallPilot
Planning and Engineering Guide.
Avaya CallPilot
®
201i Server Hardware Installation December 2010 29