manualshive.com logo in svg

APRILIA DORSODURO FACTORY ABS 2011, Руководство по обслуживанию станции

Поделиться
Скачать
APRILIA DORSODURO FACTORY ABS 2011 Скачать руководство пользователя страница 291

•

Unscrew and remove the U-bolt four

fixing screws.

•

Remove the U-bolt.

•

Remove the handlebar and place it

paying attention that oil in the clutch

and front brake tanks does not spill out.

•

Undo and remove the top bolt on the

headstock.

•

Screw the fixing screws of the upper

plate.

•

Undo and remove the two screws fixing

the instrument panel support to the fork

upper plate.

•

Slide off the fork upper plate by moving it towards the instrument panel.

DORSODURO FACTORY ABS

Suspensions

SUSP - 291

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.

email: [email protected]

Содержание DORSODURO FACTORY ABS 2011




























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды