Mechanical Installation
ANCA Motion
DS619-0-00-0019 - Rev 0
27
4
Figure 4-1 Installation in a single row
If multiple rows of drives are required to be installed, follow the layout below for this arrangement.
If drives are to be mounted in a multiple row arrangement, please ensure that the drives are
offset / staggered at least a full drive width apart to maintain effective cooling. For 3A drives at
least 43mm apart, 9A drives at least 60mm apart).
Ensure there is a minimum gap between each row of drives. For 3A drives at least 30mm
apart, 9A drives at least 50mm apart.