Technical Data
ANCA Motion
DS619-0-00-0019 - Rev 0
171
12
12.12
Discharge Period
If additional capacitance is added to the bus the discharge period for the bus capacitance to drain to 40V can be
calculated by:
(
)
Where
(
)
C
0
is
for AMD2000 3A drive and
for AMD2000 9A Drive
12.13
Motor Output Power
See ratings table below: This is dependent on motor input voltage, optional harmonic suppression inductor if
used and optional additional bus capacitance, and if a single or three phase supply is used. Note that the
increase of power by using additional bus capacitance is not covered in the de-ratings tables. Please contact
ANCA Motion applications if increased power output is required by using additional bus capacitance. Please
note that final output power capability is defined by the thermal rating for the AMD2000 3A.