manualshive.com logo in svg

AMX NetLinx Studio, Инструкция по эксплуатации

Поделиться
Скачать
AMX NetLinx Studio Скачать руководство пользователя страница 175

File Transfer Operations

163

  NetLinx Studio - Instruction Manual

Transfer Errors and Definitions

The following table describe the most common error messages that might be displayed in the Error column of the 
Transfer Status Window. 

Firmware Transfers

NetLinx Studio provides the ability to transfer KIT and TSK firmware files to a NetLinx or Axcess master controller. To 
send firmware files, select 

Tools > Firmware Transfers,

 then select either 

Send to NetLinx Device

, or 

Send to Axcess 

Device 

from the sub-menu.

Sending Firmware to a NetLinx Device (KIT File)

Use the 

Firmware Transfers

 options in the Tools menu to update the firmware in NetLinx Master Controllers or System 

devices. NXI Master Controllers use Kit files for firmware upgrades. A Kit file (*.kit) is a package of several files, all of 
which are required to upgrade the firmware, and are available online via www.amx.com. 



The Online Tree (Online Tree tab of the Workspace Bar) displays information about each online device, 
including the current firmware version.



Before attempting to upgrade the firmware, you must have the appropriate Kit file for your NetLinx Master.

1.

Choose 

Tools > Firmware Transfers > Send to NetLinx Device

 to open the 

Send To NetLinx Device 

dialog 

(FIG. 243). 

Transfer Errors and Definitions

Error String

Meaning

Failure

Generic/unclassified failure.

Success

Generic success.

File does not exist

The file supplied on the cmdline doesn't exist.

Failed to create 
temporary file

Couldn't create a required temporary file.

Invalid file type

The file supplied on the cmdline is an unknown file type.

Unknown Error

Generic/unknown error.

File: <filename> does not 
exist and cannot be 
transferred!

File does not exist at location specified.

File: <filename> is 
currently opened by 
another application and 
cannot be transferred!

This can happen if another application has an exclusive lock on a file.

Nothing to transfer! 
[Project Identifier invalid?]
[System Identifier invalid?]

After processing all supplied parameters and options, there was nothing to transfer. That is, 
no files could be found or nothing was specified for transfer. 

Additionally, if you specified a project identifier and/or a system identifier, you may have 
inadvertently requested an empty or nonexistent set of files.

Failed to open workspace! Failed to open the specified workspace.

No APW file

AXW file does not contain an APW.

If for any reason your Kit file transfer should fail, continue to retry the transfer until 
you are successful. DO NOT reboot the Master, or change connections until the 
transfer is complete. Failure to complete this operation successfully may result in a 
factory repair of the Master.

Содержание NetLinx Studio







































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды