manualshive.com logo in svg

AMX NetLinx Studio, Инструкция по эксплуатации

Поделиться
Скачать
AMX NetLinx Studio Скачать руководство пользователя страница 152

Working with Online Devices

140

 NetLinx Studio - Instruction Manual

Virtual/Dynamic Devices

The bottom entry for devices under the Master in the online tree is the 

Dynamic/Virtual Devices

 folder (FIG. 218). 

Note that each dynamic/virtual device uses a single port (Port 1).

Online Tree Context Menu

Right-click on any device or folder, or click the 

Display

 command button (in the Online Tree tab of the Workspace Bar) 

to open the Online Tree context menu. See the 

Online Tree Context Menu

section on page 222 for details.

Setting Online Tree Preferences

Options for setting Online Tree preferences are available via the Online Tree context menu (see page 140), and the 
Online Tree - Zero-Config tab of the Preferences dialog (see 

Preferences dialog - Online Tree - Zero Config tab

 on 

page 209).

Viewing Online Devices and Ports

If you are connected to a System with online devices, you can view the online devices, device properties, and device port 
properties in the Online Tree:

1.

In the Online Tree, click the 

Display

 command button and select 

Refresh Network Online Tree

.

2.

All devices currently connected to the Master are displayed in the Online Tree. The number of Masters in this 
System, total number of devices online, and the total number of ports in the System are indicated in the (read-only) 

Master(s)

, 

Devices

 and 

Ports

 fields a the bottom of this tab (FIG. 219). 

• Found NDP 

Devices:

A device is "Found" if the device has been bound to a NetLinx Master and is communicating 
with that NetLinx Master. Found devices inherit the System Number of the NetLinx Master it is 
"Found" by.

If the device has been configured with a valid Device Number, it will communicate with the 
NetLinx Master as that Device Number. If it has not been configured with a valid Device 
Number, it will request a Dynamic Device Number from the NetLinx Master and use the 
Dynamic Device Number to communicate with the NetLinx Master.

FIG. 218  

Master Controller Device Components - Dynamic/Virtual Devices

FIG. 219  

Online Tree - total Master(s), Devices and Ports in the System

Содержание NetLinx Studio







































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды