Configuration
76
4. Confirm the selection once the configuration is com-
plete by selecting
Submit.
Type
Explanation
Can be assigned
to partitions
not used
This output is not used and not activated at any time.
Yes
Intruder alarm
This output is activated when one of the following zone
types or events is triggered and the system is armed:
Normal Alarm
Tamper (only when system is armed)
Entry Route
Tamper zone (only when system is armed)
Entry delay expired
24 Hour Alarm (only when system is armed)
Yes
Conf. Intruder alarm
This type only functions when confirmation mode BS8243
is selected under "System -> Confirmation".
A confirmed burglar alarm has occurred (normal alarm).
The alarm panel activates the output when:
two "normal alarms" are triggered in the same partition
during the confirmation time
a "normal alarm" and a tamper alarm are triggered in
the same partition during the confirmation time.
This output type can be used for one or more partitions.
Note that "normal alarms" and tamper alarms must be lo-
cated in the same partition as the output.
The output is deactivated when a user resets the system.
Yes
Burg Confirm Timer
This output is activated while the timer for confirmation of
a burglar alarm is running and is deactivated as soon as
the timer stops.
No
Perimeter Warning
The output is activated when a perimeter warning is trig-
gered.
Yes
Panic alarm
This output is activated when a hold up alarm is triggered. Yes
HUA Confirm
A confirmed hold up alarm has occurred.
The alarm panel activates the output under the following
conditions:
Users trigger an alarm at at least two different hold up
transmitters during the hold up confirmation time.
A hold up transmitter is activated and a tamper alarm of
a hold up transmitter is triggered during the confirmation
time.
This output type can be assigned to one or more parti-
tions. Note that the hold up transmitter (and tamper
alarms) must be assigned to the same partition.
The output is deactivated as soon as a user resets the
system.
No
Содержание SECVEST FUAA50 Series
