Abus SECVEST FUAA50 Series, Руководство по установке

Страница: 312 / 327

Appendix
312
Carry out a GSM/wireless mobile manual test call, prepaid
Danger
and
Note
If you use a prepaid SIM card on a prepaid tariff,
e.g. CallYa, Xtra or MagentaMobil-Start
Please carry out a GSM/wireless mobile test call and/or send a GSM/wireless mobile test text message every month
or every three months .
If you do not use the GSM/wireless mobile network for a long time it can be that there is:
no alarm call via GSM/wireless mobile,
no alarm SMS via GSM/wireless mobile,
and the card is temporarily locked by the network operator.
The card can no longer connect to the GSM/wireless mobile network.
You will see a fault notification on the alarm panel.
This means it is
not possible to trigger an alarm call or an alarm text message . Furthermore, the alarm panel can-
not be contacted via GSM/wireless mobile .
If the network is not used for a long time the operator may do this with contract SIM cards as well.
Therefore, please also carry out a GSM/wireless mobile test call and/or send a GSM/wireless mobile test text mes-
sage
every month or every three months .
Diagnostic LEDs on the motherboard and GSM/wireless mobile module
LED designation on the PCB Explanation
HEARTBEAT Operating status display
Flashing green, 1 Hz
Normal operating status
Secvest Update Utility in use:
The "heartbeat" LED should be flashing quickly to show that the
Secvest is currently working in "Update" mode.
BOM: LED9 Y/G
3V3 Internal power supply 3.3 V
On green
Internal power supply 3.3 V is OK.
BOM: LED7 Y/G
13V8 Internal power supply 13.8 V
On green
Internal power supply 13.8 V is OK.
BOM: LED6 Y/G
ACTIVITY Ethernet activity
Off
No Connection