Abus SECVEST FUAA50 Series, Руководство по установке

Страница: 296 / 327

Appendix
296
Log
Log book entries
This appendix provides a short explanation of the messages that may appear in the alarm panel log.
Please note that many of these messages refer to specific components with the respective component numbers. For
this reason, it is not possible to show the exact log messages that you would see in a particular installation in this list.
The list itself is in alphabetical order according to the message text. In the “Log entry” column you will see “==” or
sometimes “#”. These characters stand for zone, user or component numbers which the alarm panel has recorded for
the event. In the “Explanation” column, this will be displayed as “nn” or “n”.
In the listed communication messages, “$m” stands for the type of the communication channel used.
Log book entry Explanation
"$m Alarm OK"
Successful alarm transmission to the ARC via the corresponding transmis-
sion path (PSTN / IP / GSM / wireless mobile)
"$m Email Fail" $m Email Fail
"$m Line Restore" Communication channel restored
"$m Line Fault" Communication channel fault
"$m Modem Fault" $m modem fault
"$m Modem Restore" $M Modem Restore
"$m fault ESCC protocol" $m fault in communication monitoring station log
"$m Social Fail" $M fail when sending the social care protocol
"$m SMS Fail" $m SMS Fail communication
"$m Speech Fail" $m Speech Dialler failed
"== A/C Fail Rst" Extension == power supply restored
"== A/C Fail Flt" Extension == power supply failure
"== Aux Fuse Flt" Extension == fuse missing
"== Aux Tamper Rstr" Extension == fuse restored
"== Aux1 O/P Flt" Extension == power failure in output 1
"== Aux1 O/P Rst" Extension == power in output 1 ok
"== Aux2 O/P Flt" Extension == power failure in output 2
"== Aux2 O/P Rst" Extension == power in output 2 ok
"== Miss Batt 1" Extension == battery 1 missing
"== Batt 1 OK" Extension == battery 1 ok
"== Miss Batt 2" Extension == battery 2 missing
"== Batt 2 OK" Extension == battery 2 ok
"== Ex Keys Rstr"
Tampering via
too many incor-
rect code en-
tries will be re-
set
"== Chargr 1 Flt" Extension == battery 1 charger faulty
"== Chargr 1 RESTORE" Extension == battery 1 charger ok
"== Chargr 2 FLT" Extension == battery 2 charger faulty