Abus SECVEST FUAA50 Series, Руководство по установке

Страница: 133 / 327

Configuration
133
Name/function Explanation (checkbox)
Supervision Dropdown selection field for alarm system response for supervision
If a wireless detector has had no contact with the alarm control panel for more than
20 min, the alarm panel creates a log entry: "RF warning". The alarm panel also
prevents the system from being armed. If a user overrides this warning and arms
the alarm panel, the log entry "RF warning overridden" is generated.
If a wireless detector has had no contact with the alarm panel for more than 2 h,
corresponding processes are activated as follows:
Alarm panel is armed Alarm panel is disarmed
Disabled
No response No response
Fault

Log book entry of this
event

No display and no warning
tones

"RF Supervision" or "RF Fault"
outputs are activated

Log book entry of this event

Display and warning tones

"RF Supervision" or "RF Fault"
outputs are activated
Tamper Ac-
tivated

Tampering alarm

Supervision is reported
Note :
If "Tamp as Tamp-Only" is disa-
bled, the "Supervision" or "Fault"
outputs are also activated.
If no tamper channel is assigned
in FF, an "unconfirmed alarm" is
sent.

Tampering alarm

Supervision is reported
Note
If "Tamp as Tamp-Only" is disa-
bled, the "Supervision" or "Fault"
outputs are also activated.
If no tamper channel is assigned
in FF, an "unconfirmed alarm" is
sent.
Note
The "Tamper" option is required in Grade 2 systems in order to comply with
EN 50131-1:2006+A1:2009.
If the "Tamper" option is used along with the following setting:
System -> User Reset -> System Tampers = No
the user cannot reset the system.