Abus SECVEST FUAA50 Series, Руководство по установке

Страница: 314 / 327

Appendix
314
Go to the following menu on the alarm control panel:
Installer Mode -> Info -> Communication
Press the * button and then the <x> key. Below you will learn which digit "x" may be.
A live trace buffer (live mode) is displayed.
When the trace is displayed
Press the # button to see the time stamp.
Press the * button to take a snapshot (snapshot mode). Use the up/down keys to scroll through the trace
buffer. Press the * button to return to the live mode.
Press the right-hand menu key in live mode or snapshot mode to move horizontally to the right. Go back by
pressing the up or down keys.
To save the relevant trace to the SD card, press key 0 in live mode or snapshot mode. After removing the SD
card, the trace can also be easily evaluated on a computer.
The trace is saved as follows:
\TRACE\trace_0X.txt
Below you will learn which digit "x" may be.
Note:
">" means "outwards", the alarm control panel has sent it or it has been transferred from the alarm control
panel.
"<" means "inwards", the alarm control panel has received it or it has been transferred to the alarm control
panel.
S/W <= v2.01.08
X = 0 = GSM / wireless mobile (e.g. "GSM
– HUAWEI MG 323-B" or "plug-by")
Communication between the motherboard and the GSM/wireless mobile module, AT commands, etc.
Example:
AT command CSQ
< +CSQ: <rssi>,<ber>
Parameter description
<rssi>: receive signal strength indicator
0:
≤ -113 dBm
1: -111 dBm
2...30: -109...-53 dBm (2dBm Schritte)
31:
≥ 51 dBm
99: unknown or immeasurable
<ber>: bit error rate in percentage. The value of
ber can be queried only during the
call processing. Otherwise, only the value 0 or 99 is returned. Currently, only the
value 99 is returned.
E.g.
+CSQ: 14.99
14 = -85 dBm (Secvest display RSSI 4)
Value range of up to 0-31 represents value range from Secvest 0-9
X = 1 = Email
The communication protocol between the alarm control panel and the SMTP server.
X = 2 = VoIP SIP
The communication protocol between the alarm control panel and the VoIP server.
X = 3 = Telephone call
The telephone report from the speech dialler via a/b (PSTN) or GSM/wireless mobile
or