Abus SECVEST FUAA50 Series, Руководство по установке

Страница: 134 / 327

Configuration
134
Name/function Explanation (checkbox)
RF Jamming Dropdown selection field for alarm system response for jamming:
The alarm panel can detect jamming of wireless signals.
Corresponding processes are activated as follows:
Alarm panel is armed Alarm panel is disarmed
Disabled No response No response
Fault

Log book entry of this
event

No display and no warning
tones

Log book entry of this event

Display and warning tones
Tamper Ac-
tivated

Tampering alarm

Jamming is reported
Note :
If "Tamp as Tamp-Only" is disa-
bled, the "Jamming" or "Fault"
outputs are also activated.
If no tamper channel is assigned
in FF, an "unconfirmed alarm" is
sent.

Tampering alarm

Jamming is reported
Note
If "Tamp as Tamp-Only" is disa-
bled, the "Jamming" or "Fault"
outputs are also activated.
If no tamper channel is assigned
in FF, an "unconfirmed alarm" is
sent.
Note
The "Tamper" option is required in order to comply with PD 6662:2010.
If the "Tamper" option is used along with the following setting:
System -> User Reset -> System Tampers = No
the user cannot reset the system.
Remote Updates
Alarm panel
Installer Mode -> System -> Security -> Remote Updates -> Blocked*/Enabled
WBI
Installer Mode -> System -> Security Settings -> Remote Updates -> Blocked (deac-
tivated, not ticked)*/Enabled (activated, ticked)
Blocked (deactivated
– not ticked)*
Enabled (activated
– ticked)
If this option is activated, a new Level 4 code must be entered. This is only
the case if this Level 4 code was never programmed to begin with (as deliv-
ered or since the last reset to the factory defaults). This Level 4 code has
the same number of digits as the Installer code or the User code.
Enter a "New Level 4 code" and "Confirm Level 4 code" (enter the code
again to confirm it).
A new user is added automatically. See "User" menu.
Name: "Level4"
Note:
For security reasons, you should change the "Level4" default name of
the Level 4 user.
The user themselves or the administrator can change the name of this user.