ACS550 User’s Manual
33
Start-Up
Changed Parameters Mode
Use the Changed Parameters mode to view (and edit) a listing of all parameters that
have been changed from macro default values.
Procedure:
1. Select CHANGED PAR in the Main Menu.
The display lists all changed parameters.
2. Press ENTER.
3. Press UP/DOWN to select a changed parameter.
As each parameter is highlighted, the parameter value appears.
4. Press EDIT to edit the parameter value.
5. Press UP/DOWN to select a new value / edit the parameter value. (Pressing both
keys at the same time sets a parameter to its default value.)
6. Press SAVE to save the new parameter value. (If the new value is the default value,
the parameter will no longer appear on the Changed Parameters listing.)
Fault Logger Mode
Use the Fault Logger Mode to see drive fault history, fault state details and help for
the faults.
1. Select FAULT LOGGER in the Main Menu.
2. Press ENTER to see the latest faults (up to 10 faults, maximum).
3. Press DETAIL to see details for the selected fault.
•
Details are available for the three latest faults.
4. Press DIAG to see the help description for the fault. See "Diagnostics" section.
Note!
If a power off occurs, only the three latest faults will remain (with details only
for the most recent fault).
Clock Set Mode
Use the Clock Set mode to:
•
Enable/disable the clock function.
•
Set date and time.
•
Select display format.
1. Select CLOCK SET in the Main Menu.
2. Press UP/DOWN to step to the desired option.
3. Press EDIT.
4. Press UP/DOWN to select the desired setting.
5. Press SAVE to save setting.
