Chapter 24 Multicast
GS1920v2 Series User’s Guide
206
The following table describes the labels in this screen.
24.3.1 IG MP Sno o ping
Click the
IG MP Sno o ping
link in the
Adva nc e d Applic a tio n
>
Multic a st > IPv4 Multic a st
screen to display
the screen as shown. See
Section 24.1 on page 201
for more information on multicasting.
Fig ure 148
Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping
The following table describes the labels in this screen.
Table 81 Advanced Application > Multicast > IPv4 Multicast
LABEL
DESC RIPTIO N
Index
This is the index number of the entry.
VID
This field displays the multicast VLAN ID.
Port
This field displays the port number that belongs to the multicast group.
Multicast Group
This field displays IP multicast group addresses.
Table 82 Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping
LABEL
DESC RIPTIO N
IGMP Snooping
Use these settings to configure IGMP snooping.
Active
Select
Ac tive
to enable IGMP Snooping to forward group multicast traffic only to ports that
are members of that group.
Querier
Select this option to allow the Switch to send IGMP General Query messages to the VLANs with
the multicast hosts attached.