Chapter 30 Error Disable
GS1920v2 Series User’s Guide
276
Fig ure 198
Advanced Application > Errdisable > Errdisable Status
The following table describes the labels in this screen.
Table 125 Advanced Application > Errdisable > Errdisable Status
LABEL
DESC RIPTIO N
Inactive-reason
mode reset
Port List
Enter the number of the port(s) (separated by a comma) on which you want to reset inactive-
reason status.
Cause
Select the cause of inactive-reason mode you want to reset here.
Reset
Press to reset the specified port(s) to handle ARP, BPDU or IGMP packets instead of ignoring
them, if the port(s) is in inactive-reason mode.
Errdisable Status
Port
This is the number of the port on which you want to configure Errdisable Status.
Cause
This displays the type of the control packet received on the port or the feature enabled on the
port and causing the Switch to take the specified action.
Active
This field displays whether the control packets (ARP, BPDU, and/or IGMP) on the port is being
detected or not. It also shows whether loop guard is enabled on the port.
Mode
This field shows the action that the Switch takes for the cause.
•
ina c tive - po rt
- The Switch disables the port.
•
ina c tive - re a so n
- The Switch drops all the specified control packets (such as BPDU) on the
port.
•
ra te - lim ita tio n
- The Switch drops the additional control packets the port(s) has to handle in
every one second.
Rate
This field displays how many control packets this port can receive or transmit per second. It can
be adjusted in
C PU Pro te c tio n
.
0
means no rate limit.
