Chapter 31 Private VLAN
GS1920v2 Series User’s Guide
282
Fig ure 203
Advanced Application > Private VLAN
The following table describes the labels in this screen.
Table 129 Advanced Application > Private VLAN
LABEL
DESC RIPTIO N
Active
Check this box to enable private VLAN in a VLAN.
Name
Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes.
VLAN ID
Enter a VLAN ID from 1 to 4094. This is the VLAN to which this rule applies.
Promiscuous Ports
Enter the number of the port(s) that can communicate with any ports in the same VLAN. Other
ports belonging to this VLAN will be added to the isolation list and can only send and receive
traffic from the port(s) you specify here.
Add
Click
Add
to insert the entry in the summary table below and save your changes to the Switch’s
run-time memory. The Switch loses these changes if it is turned off or loses power, so use the
Sa ve
link on the top navigation panel to save your changes to the non-volatile memory when
you are done configuring.
Cancel
Click
C a nc e l
to reset the fields to your previous configuration.
Clear
Click
C le a r
to clear the fields to the factory defaults.
Index
This is the index number of the rule.
Active
This shows whether this rule is activated or not.
Name
This is the descriptive name for this rule.
VLAN
This is the VLAN to which this rule is applied.
Promiscuous Ports
This shows the port(s) that can communicate with any ports in the same VLAN.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete
Check the rule(s) that you want to remove and then click the
De le te
button.
Cancel
Click
C a nc e l
to clear the check boxes.
