Chapter 8 Basic Setting
GS1920v2 Series User’s Guide
84
Fig ure 62
Basic Setting > IP Setup
The following table describes the labels in this
screen.
Table 16 Basic Setting > IP Setup
LABEL
DESC RIPTIO N
Default Management IP Address
DHCP Client
Select this option if you have a DHCP server that can assign the Switch an IP address,
subnet mask, a default gateway IP address and a domain name server IP address
automatically.
Static IP Address
Select this option if you don’t have a DHCP server or if you wish to assign static IP address
information to the Switch. You need to fill in the following fields when you select this option.
IP Address
Enter the IP address of your Switch in dotted decimal notation for example 192.168.1.1.
IP Subnet Mask
Enter the IP subnet mask of your Switch in dotted decimal notation for example
255.255.255.0.
Default Gateway
Enter the IP address of the default outgoing gateway in dotted decimal notation, for
example 192.168.1.254.
VID
Enter the VLAN identification number associated with the Switch IP address. This is the VLAN
ID of the CPU and is used for management only. The default is "1". All ports, by default, are
fixed members of this "management VLAN" in order to manage the device from any port. If
a port is not a member of this VLAN, then users on that port cannot access the device. To
access the Switch make sure the port that you are connected to is a member of
Management VLAN.
Apply
Click
Apply
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Sa ve
link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click
C a nc e l
to reset the fields to your previous configuration.
