Chapter 4 The Web Configurator
GS1920v2 Series User’s Guide
47
Fig ure 30
Web Configurator: Warning
Fig ure 31
Web Configurator: Password
Change the default administrator and/or SNMP passwords, and then click
Apply
to save your changes.
Table 5 Web Configurator: Password/SNMP
LABEL
DESC RIPTIO N
Administrator
This is the default administrator account with the “admin” user name. You cannot change the default administrator
user name. Only the administrator has read/write access.
Old Password
Type the existing system password (
1234
is the default password when shipped).
New Password
Enter your new system password.
Retype to confirm
Retype your new system password for confirmation
General Setting
Use this section to specify the SNMP version and community (password) values.
Version
Select the SNMP version for the Switch. The SNMP version on the Switch must match the version
on the SNMP manager. Choose SNMP version 2c (
v2c
), SNMP version 3 (
v3
) or both (
v3v2c
).
Note: SNMP version 2c is backwards compatible with SNMP version 1.
Get Community
Enter the
G e t C o m m unity
string, which is the password for the incoming Get- and GetNext-
requests from the management station.
The
G e t C o m m unity
string is only used by SNMP managers using SNMP version 2c or lower.
