Chapter 5 Initial Setup Example
GS1920v2 Series User’s Guide
56
C
HA PTER
5
Initia l Se tup Exa m ple
5.1 O ve rvie w
This chapter shows how to set up the Switch for an example network.
The following lists the configuration steps for the initial setup:
•
Creating a VLAN
•
Setting Port VID
•
Configuring Switch Management IP Address
5.1.1 C re a ting a VLAN
VLANs confine broadcast frames to the VLAN group in which the port(s) belongs. You can do this with
port-based VLAN or tagged static VLAN with fixed port members.
In this example, you want to configure port 1 as a member of VLAN 2.
Fig ure 35
Initial Setup Network Example: VLAN
1
Click
Adva nc e d Applic a tio n
>
VLAN
>
VLAN C o nfig ura tio n
in the navigation panel and click the
Sta tic
VLAN Se tup
link.