Chapter 34 OAM
GS1920v2 Series User’s Guide
313
34.3 O AM C o nfig ura tio n
Use this screen to turn on Ethernet OAM on the Switch and port(s) and configure the related settings.
In the
O AM Sta tus
screen click
C o nfig ura tio n
to display the configuration screen as shown.
Fig ure 222
Advanced Application > OAM > OAM Configuration
The following table describes the labels in this screen.
Unsupported
OAMPDU Tx
This field displays the number of unsupported OAM PDUs sent on the port.
Unsupported
OAMPDU Rx
This field displays the number of unsupported OAM PDUs received on the port.
Table 145 Advanced Application > OAM Status > OAM Details (continued)
LABEL
DESC RIPTIO N
Table 146 Advanced Application > OAM > OAM Configuration
LABEL
DESC RIPTIO N
Active
Select this option to enable Ethernet OAM on the Switch.
Port
This field displays the Switch’s port number.
*
Use this row to make the setting the same for all ports. Use this row first and then make
adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active
Select this check box to enable Ethernet OAM on this port.
Clear this check box to disable Ethernet OAM on the port.
