![background image](http://html1.mh-extra.com/html/zyxel-communications/gs1920-48hpv2/gs1920-48hpv2_user-manual_945073031.webp)
GS1920v2 Series User’s Guide
31
Fig ure 7
Mounting the Switch under a Table
5
Place the washers on the screw holes of the bracket.
6
Using a #2 Philips screwdriver, install the M4 flat head screws through the washers and mounting bracket
holes into the table. The washers should be in between the M4 flat head screws and the brackets.
7
Repeat steps
1
and
6
to attach the second mounting bracket under the table.
2.4 Wa ll Mo unting (G S1920- 8HPv2 O nly)
The GS1920-8HPv2 can be mounted on a wall. You may need screw anchors if mounting on a concrete
or brick wall.
2.4.1 Insta lla tio n Re q uire m e nts
• Distance between holes: 78mm
• Two M4 screws and a #2 Philips screwdriver
• Two screw anchors (optional)
1
Select a position free of obstructions on a wall strong enough to hold the weight of the Switch.
2
Mark two holes on the wall at the appropriate distance apart for the screws.
WARNING ! Be c a re ful to a vo id da m a g ing pipe s o r c a b le s lo c a te d inside
the wa ll whe n drilling ho le s fo r the sc re ws.
3
If using screw anchors, drill two holes for the screw anchors into the wall. Push the anchors into the full
depth of the holes, then insert the screws into the anchors. Do not insert the screws all the way in - leave
a small gap of about 0.5 cm.
If not using screw anchors, use a screwdriver to insert the screws into the wall. Do not insert the screws all
the way in - leave a gap of about 0.5 cm.
4
Make sure the screws are fastened well enough to hold the weight of the Switch with the connection
cables.