GS1920v2 Series User’s Guide
58
Fig ure 36
Initial Setup Network Example: Port VID
1
Click
Adva nc e d Applic a tio ns
>
VLAN
>
VLAN
C o nfig ura tio n
in the navigation panel. Then
click the
VLAN Po rt Se tup
link.
2
Enter 2 in the
PVID
field for port 2 and click
Apply
to save your changes back to the run-
time memory. Settings in the run-time memory
are lost when the Switch’s power is turned off.
5.1.3 C o nfig uring Switc h Ma na g e m e nt IP Addre ss
The default management IP address of the Switch is 192.168.1.1. You can configure another IP address in
a different subnet for management purposes. The following figure shows an example.