Chapter 8 Basic Setting
GS1920v2 Series User’s Guide
100
The following table describes the labels in this screen.
8.10.7 IPv6 Ne ig hb o r Disc o ve ry Se tup
Use this screen to configure neighbor discovery settings for each interface. Click the link next to
IPv6
Ne ig hb o r Disc o ve ry Se tup
in the
IPv6 C o nfig ura tio n
screen to display the screen as shown next.
Fig ure 76
Basic Setting > IPv6 > IPv6 Configuration > IPv6 Neighbor Discovery Setup
Table 29 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Global Address Setup
LABEL
DESC RIPTIO N
Interface
Select the IPv6 interface you want to configure.
IPv6 Global
Address
Manually configure a static IPv6 global address for the interface.
Prefix Length
Specify an IPv6 prefix length that specifies how many most significant bits (start from the left) in
the address compose the network address.
EUI-64
Select this option to have the interface ID be generated automatically using the EUI-64 format.
Add
Click
Add
to save your changes to the Switch’s run-time memory. The Switch loses these changes
if it is turned off or loses power, so use the
Sa ve
link on the top navigation panel to save your
changes to the nonvolatile memory when you are done configuring.
Cancel
Click
C a nc e l
to begin configuring this screen afresh.
Clear
Click
C le a r
to reset the fields to the factory defaults.
Index
This is the interface index number. Click on an index number to change the settings.
Interface
This is the name of the IPv6 interface you created.
IPv6 Global
Address/Prefix
Length
This field displays the IPv6 global address and prefix length for the interface.
EUI-64
This shows whether the interface ID of the global address is generated using the EUI-64 format.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete
Check the entry(ies) that you want to remove and then click
De le te
to remove the selected
entry(ies) from the summary table.
Cancel
Click
C a nc e l
to clear the check boxes.
