Chapter 21 Classifier
GS1920v2 Series User’s Guide
190
21.3.1 Vie wing a nd Editing C la ssifie r C o nfig ura tio n Sum m a ry
To view a summary of the classifier configuration, scroll down to the summary table at the bottom of the
C la ssifie r
screen. To change the settings of a rule, click a number in the
Inde x
field.
Note: When two rules conflict with each other, a higher layer rule has priority over lower layer
rule.
Fig ure 138
Advanced Application > Classifier > Classifier Configuration: Summary Table
The following table describes the labels in this screen.
The following table shows some other common Ethernet types and the corresponding protocol number.
Cancel
Click
C a nc e l
to reset the fields back to your previous configuration.
Clear
Click
C le a r
to set the above fields back to the factory defaults.
Table 72 Advanced Application > Classifier > Classifier Configuration (continued)
LABEL
DESC RIPTIO N
Table 73 Advanced Application > Classifier > Classifier Configuration: Summary Table
LABEL
DESC RIPTIO N
Index
This field displays the index number of the rule. Click an index number to edit the rule.
Active
This field displays
Ye s
when the rule is activated and
No
when it is deactivated.
Weight
The field displays the priority of the rule when the match order is in
m a nua l
mode. A higher weight
means a higher priority.
Name
This field displays the descriptive name for this rule. This is for identification purpose only.
Rule
This field displays a summary of the classifier rule’s settings.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the table
heading row to select all entries.
Delete
Click
De le te
to remove the selected entry from the summary table.
Cancel
Click
C a nc e l
to clear the check boxes.
Table 74 Common Ethernet Types and Protocol Numbers
ETHERNET TYPE
PRO TO C O L NUMBER
IP ETHII
0800
X.75 Internet
0801
NBS Internet
0802
ECMA Internet
0803
Chaosnet
0804
X.25 Level 3
0805
XNS Compat
0807
Banyan Systems
0BAD
BBN Simnet
5208
