Chapter 24 Multicast
GS1920v2 Series User’s Guide
219
Fig ure 157
Advanced Application > Multicast > MVR
The following table describes the related labels in this screen.
Table 91 Advanced Application > Multicast > MVR
LABEL
DESC RIPTIO N
Active
Select this check box to enable MVR to allow one single multicast VLAN to be shared among
different subscriber VLANs on the network.
Group Name
Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes.
Multicast VLAN ID
Enter the VLAN ID (1 to 4094) of the multicast VLAN.
802.1p Priority
Select a priority level (0-7) with which the Switch replaces the priority in outgoing IGMP or MLD
control packets (belonging to this multicast VLAN).
Mode
Specify the MVR mode on the Switch. Choices are
Dyna m ic
and
C o m pa tib le
.
Select
Dyna m ic
to send IGMP reports or MLD messages to all MVR source ports in the multicast
VLAN.
Select
C o m pa tib le
to set the Switch not to send IGMP reports or MLD messages.
Port
This field displays the port number on the Switch.
