![background image](http://html1.mh-extra.com/html/zyxel-communications/gs1920-48hpv2/gs1920-48hpv2_user-manual_945073376.webp)
Chapter 44 Cluster Management
GS1920v2 Series User’s Guide
376
• Use the
C luste ring Ma na g e m e nt C o nfig ura tio n
screen (
Section 44.1 on page 375
) to configure
clustering management.
44.2 C luste r Ma na g e m e nt Sta tus
Use this screen to view the role of the Switch within the cluster and to access a cluster member switch’s
web configurator.
Click
Ma na g e m e nt
>
C luste r Ma na g e m e nt
in the navigation panel to display the following screen.
Note: A cluster can only have one manager.
Fig ure 276
Management > Cluster Management: Status
The following table describes the labels in this screen.
Table 187 Management > Cluster Management: Status
LABEL
DESC RIPTIO N
Status
This field displays the role of this Switch within the cluster.
Ma na g e r
Me m b e r
(you see this if you access this screen in the cluster member switch directly and not via
the cluster manager)
No ne
(neither a manager nor a member of a cluster)
Manager
This field displays the cluster manager switch’s hardware MAC address.
The Number of
Member
This field displays the number of switches that make up this cluster. The following fields describe
the cluster member switches.
Index
You can manage cluster member switches via the cluster manager switch. Each number in the
Inde x
column is a hyperlink leading to the cluster member switch’s web configurator (see
Figure
278 on page 379
).
MacAddr
This is the cluster member switch’s hardware MAC address.
Name
This is the cluster member switch’s
Syste m Na m e
.
Model
This field displays the model name.
Status
This field displays:
O nline
(the cluster member switch is accessible)
Erro r
(for example the cluster member switch password was changed or the switch was set as the
manager and so left the member list, etc.)
O ffline
(the switch is disconnected -
O ffline
shows approximately 1.5 minutes after the link
between cluster member and manager goes down)