Zeiss Lightsheet Z.1 Operating Manual Download Page 370

Page: 370 / 427

CHAPTER 4 - SYSTEM OPERATION

Carl Zeiss

Center Screen Area / Image Containers - Display and Image Analysis

Lightsheet Z.1

200

000000-1790-528

02/2013

4.7

2.5 D View

This function allows one to

−

display the two-dimensional intensity distribution of an image in a pseudo 3D mode,

−

show the intensity values in profile, grid, or filled mode,

−

show separate distribution for each channel in a multi-channel image.

The

2.5 D

button can also be used online during imaging.

The settings of the

Dimensions

View Options control blocks apply. The settings of

Display

Player

, and

Graphics

View Options control blocks do not apply.

Any changes done with this toolbar are effective immediately. The content of the overlay plane is

temporarily hidden while the toolbar is displayed.
The image display in the

2.5 D View Type

is the same as in the

(VisArt) View Type. For a description

of the controls in the display window, see section

4.8.8 3D Rendering Settings in VisArt

In brief, the viewing plane of the

Image Display

window can be rotated, tilted either directly with the

mouse or by the scroll bars on the right-hand side and the bottom of the

Image Display

window.

Fig. 302

2.5 D View Option control tabs

Summary of Contents for Lightsheet Z.1












































































































































































































































































































































































































































Search results

Summary of Contents for Lightsheet Z.1

Reviews:

Related manuals for Lightsheet Z.1

Brands by name

Popular brands

Zeiss Lightsheet Z.1, Operating Manual

Search results

Summary of Contents for Lightsheet Z.1

Reviews:

Related manuals for Lightsheet Z.1

Brands by name

Popular brands