Zeiss Lightsheet Z.1, Operating Manual

Page: 358 / 427

CHAPTER 4 - SYSTEM OPERATION
Carl Zeiss Center Screen Area / Image Containers - Display and Image Analysis Lightsheet Z.1
188 000000-1790-528 02/2013
4.2.2 Display
In the Display View Option control block, the intensity minimum can be set for the Black value and the
intensity maximum for the White value of the image using the button.
Clicking on the button sets the intensity minimum for Black to the percentile value and the
intensity maximum for White to the percentile value.
Activating the check box sets the intensity minimum and maximum values automatically.
With the spin-boxes, you can set the lower and upper percentile values.
The Black , the Gamma , and the White values of
the displayed image can be adjusted (Fig. 289)
individually.
With the buttons, the
effect of the settings can be restricted to an
individual channel or be applied to all channels. By
default, the settings apply to all channels
simultaneously.
The parameters can be changed using the spin-
boxes – or directly by typing the numbers into the
number-field. With the
button, the original
settings are easily re-set.
With a right mouse button, click into the area
which displays the histogram, a menu opens
(Fig. 290) to change the displayed bit depth as well
as the scaling of the histogram.
The settings in this View control block apply only
to the Image Display and are NOT changed in the
original data set. To write the changed settings to
the image data set, use the
Burn in Brightness
and Contrast function in the Processing tab
(section 3.3 Processing Tab ).
Fig. 289 View Options control block - Display
Fig. 290 View Options control block – Display,
settings