Zeiss Lightsheet Z.1 Operating Manual Download Page 337

Page: 337 / 427

CHAPTER 4 - SYSTEM OPERATION

Lightsheet Z.1

Left Tool Area and Hardware Control Tools

Carl Zeiss

02/2013

000000-1790-528

167

3.4.2

Maintain – Filters

Expand the

Filters

tool to define the filters present in

the Reflector Turret for Laser Blocking Filters as well as

in the Reflector Turret for Emission Selection for your
Lightsheet Z.1 system as will be shown in the ZEN

software.
Laser blocking filters are easily exchangeable push and

click filter cubes. The beam splitters cannot be
exchanged, but the associated emission filters can be

exchanged.
On the top is a row of tabs for every filter position. To
reach the right most tab, press the white arrow on

the right side of the row. If you press the white arrow
on the right side that points downwards, a list of all

possible tabs are displayed. Here you can chose which
filters to edit.
In each tab you find a list of positions that relate to

the positions in the corresponding reflector turret.
The

Laser Blocking Filter

tab represents the

Reflector Turret for Laser Blocking Filters (Fig. 261).
These are push & click filters which can be easily

exchanged.
The

Beam Splitter

Emission Filter 1

, and

Emission

Filter 2

tabs (Fig. 262) describe the filters of the

Turret for Emission Selection. Each row of these tabs

represents one position in the turret, and all three
together represent one filter combination. Only the

Emission Filter 1

(in front of Cam1) and the

Emission Filter 2

(in front of Cam2) can be

exchanged by the user (see CHAPTER 1 HARDWARE).

To update the filter information in the software, press
on the

filter symbol

you would like to edit. This will

open a box listing the

Recent

used filters in the upper

part (Fig. 263). In the lower part are listed all available

Filters

which can be searched by entering the full or

part of the name into the

Search

field. Simply clicking

on the Filter within the list will enter its name into the

software interface.
The following abbreviations are used:
LBF:   Laser blocking filter
SBS:   Secondary beam splitter
BP:

Band pass filter

LP:

Long pass filter

SP:

Short pass filter

Fig. 261

Laser Blocking Filter Tab

Fig. 262

Beam Splitter Tab

Fig. 263

Recent and Filters list box

Summary of Contents for Lightsheet Z.1












































































































































































































































































































































































































































Search results

Summary of Contents for Lightsheet Z.1

Reviews:

Related manuals for Lightsheet Z.1

Brands by name

Popular brands

Zeiss Lightsheet Z.1, Operating Manual

Search results

Summary of Contents for Lightsheet Z.1

Reviews:

Related manuals for Lightsheet Z.1

Brands by name

Popular brands