Zeiss Lightsheet Z.1, Operating Manual

Page: 383 / 427

CHAPTER 4 - SYSTEM OPERATION
Lightsheet Z.1 Center Screen Area / Image Containers - Display and Image Analysis Carl Zeiss
02/2013 000000-1790-528 213
Clipping Planes Settings
Activate or deactivate the clipping functionality
globally by the check box
Enable clipping
.
displays the three clipping planes
in the default mode (opaque surface, colored
outlines, clipping planes active, no clipping).
With the
Plane tabs, the planes can be addressed
individually and their settings can be adjusted
independent from each other.
Outline displays or hides the colored outlines. The
actual color can be chosen from a color chooser
for each plane individually.
Show Plane
hides or displays the plane.
A plane can cut away information while being " invisible " .
For distance or angle measurements on a clipping plane, the plane has to be displayed and a color
has to be chosen for the clipping plane.
The appearance of the plane can be selected from a drop-down menu (see Fig. 317).
Clip names a row of toggle buttons switching between different clipping modes as named on the
buttons .
Using the
Pitch , Yaw , and Position sliders, each
plane can be freely orientated in three-dimensional
space.
Fig. 318 Clipping planes settings
Fig. 319 Sliders Pitch, Yaw, and Position