Zeiss Lightsheet Z.1 Operating Manual Download Page 416

Page: 416 / 427

CHAPTER 4 - SYSTEM OPERATION

Carl Zeiss

Right Tool Area, Data Management and Storage

Lightsheet Z.1

246

000000-1790-528

02/2013

5.4

Images and Documents Panel

The

Images and Documents

panel (Fig. 355) is

located in the Right Tool Area of ZEN. It displays all

images and data which are open in ZEN. Its purpose is
multi-fold:

−

All opened images can be brought to the front
by double clicking on them which makes the

navigation through lots of images easy and fast.

−

Basic file handling functions are implemented
for fast operation with the acquired images. The

images can be saved and closed using the

following buttons:

−

A new acquisition document can be opened

using the

button.

−

The

button saves the selected image.

−

The

button closes the selected image.

On already saved images the

button is

closing the image, not deleting it.
Multiple images can be selected by holding

down the CTRL key on the keyboard and
clicking on the list entries.

−

The whole section can be hidden by clicking on
the black triangle at the left side of the panel

Once hidden, a click on the right boarder of
ZEN lets the

Images and Documents

panel

slide back into the application.

−

All files can be displayed in three ways by using

the

buttons underneath the

section.

−

Textual View

−

Thumbnail View

−

Big View

The default setting is

Thumbnails view

indicated in Fig. 356.

Fig. 355

Images and Documents panel

Summary of Contents for Lightsheet Z.1












































































































































































































































































































































































































































Search results

Summary of Contents for Lightsheet Z.1

Reviews:

Related manuals for Lightsheet Z.1

Brands by name

Popular brands

Zeiss Lightsheet Z.1, Operating Manual

Search results

Summary of Contents for Lightsheet Z.1

Reviews:

Related manuals for Lightsheet Z.1

Brands by name

Popular brands