YOKOGAWA AQ6376 User Manual Download Page 329

Page: 329 / 417

9-1

IM AQ6376-01EN

Maintenance

App

Index

9.1 Updating the Firmware

When there is a firmware update, such as when new functions are added, you can

update the firmware in the AQ6376. Download the update firmware from the YOKOGAWA

website.

http://www.yokogawa.com/ymi/

CAUTION

• When the firmware is being updated, do not manually turn the power off. If you

do, you may not be able to start the AQ6376.

• If there are multiple update firmware files in the USB memory device, the

AQ6376 will not be updated.

French

ATTENTION

• Lorsque le micrologiciel est en cours de mise à jour, ne pas mettre

manuellement l'instrument hors tension. Le cas échéant, l'AQ6376 risque de ne

pas démarrer.

• L'AQ6376 ne sera pas mis à jour en cas de présence de plusieurs fichiers de

mise à jour micrologicielle sur la clé USB, l'AQ6376 n'est pas mis à jour.

Preparing to Update the Firmware

The AQ6376 can read the update firmware (.UPD extension) in one of two ways. Prepare

the update firmware according to your environment.

• Reading the Firmware from a USB Memory Device

Create a directory named “UPDATE” in the USB memory device, and save the update

firmware (.upd extension) in that directory.

Check that the AQ6376 is not connected to a network. If it is, you will not be able to

update.

• Reading the Firmware from an External PC

Save the update firmware (.upd extension) in the external PC, and connect the PC to

the AQ6376 over a network.

Procedure

Reading the Firmware from a USB Memory Device

Press

SYSTEM

. A system menu appears.

Press the

MORE

soft key repeatedly until the MORE 4/4 menu is displayed.

Press the

VERSION

soft key. The firmware version is displayed.

Press the

UPDATE(USB)

soft key. The “Insert Update Files” message appears.

Connect a USB memory device containing the update firmware to the AQ6376.

Press the

CONTINUE

soft key. A list of update firmware is displayed.

The message “Please disconnect LAN CABLE and remove USB storage device”

appears. Remove the USB memory device.

Chapter 9

Maintenance

Summary of Contents for AQ6376


































































































































































































































































































































































































































Search results

Summary of Contents for AQ6376

Reviews:

Related manuals for AQ6376

Brands by name

Popular brands

YOKOGAWA AQ6376, User Manual

Search results

Summary of Contents for AQ6376

Reviews:

Related manuals for AQ6376

Brands by name

Popular brands