YOKOGAWA AQ6376 User Manual Download Page 139

Page: 139 / 417

5-42

IM AQ6376-01EN

Advanced Markers

Moving Markers

Moving markers can be moved to an arbitrary wavelength using the rotary knob, arrow

keys, or numeric keypad.

You can also drag the markers with the mouse.

Moving markers move along the waveform and show marker values (wavelength and

level) in the data area.

If two markers are displayed, the wavelength difference and level difference between the

markers are displayed.

When marker 1 (M1) and marker 2 (M2) are displayed: marker 2 – marker 1 (M2–1)

When marker 3 (M3) and marker 4 (M4) are displayed: marker 4 – marker 3 (M4–3)

The fixed marker function is not available.

Marker number

Advanced marker type: NORM (moving marker)

Trace that the marker is assigned to: TrA (trace A)

Wavelength and level of the moving marker

Wavelength difference and level difference

between the moving markers

M2-1

M4-3

Moving markers

A number is displayed with the moving marker.

When active, the marker is solidly filled.

Power Density Markers

Power density markers show power values per normalization bandwidth by assuming the

marker position on the waveform to be the center. The power values are displayed in the

data area. They are used to determine converted power values per given bandwidth such

as when measuring the signal noise level.

The selectable normalization bandwidth range is 0.1 to 10.0 nm. If you press the

COARSE key, you can set the value in 1 nm steps using the rotary knob or arrow keys. If

you do not press the COARSE key, you can set the value in 0.1 nm steps.

The way to move the markers and the data display between markers are the same as

with the above-mentioned moving markers.

Advanced marker type: /BW (power density marker)

Normalization bandwidth

Power density marker power values

5.9 Marker Display

Summary of Contents for AQ6376


































































































































































































































































































































































































































Search results

Summary of Contents for AQ6376

Reviews:

Related manuals for AQ6376

Brands by name

Popular brands

YOKOGAWA AQ6376, User Manual

Search results

Summary of Contents for AQ6376

Reviews:

Related manuals for AQ6376

Brands by name

Popular brands