YOKOGAWA AQ6376 User Manual Download Page 388

Page: 388 / 417

App-44

IM AQ6376-01EN

WDM FILTER BOTTOM Analysis Function

This function enables the collective analysis of multiple items of each channel via the

measured waveforms of multi-channel optical filters.

It also enables filter analysis for multi-mode waveforms, which is different from the

FILTER BOTTOM analysis.

Items for analysis

Item for Analysis

Description

Nominal Wavelength

Reference wavelength/frequency of each channel.

Bottom Wavelength / Level Peak wavelength/frequency and level of each channel

xdB Notch Width /

xdB notch width of each channel and its center wavelength/

Center Wavelength

frequency.

xdB stop-band

Wavelength width / frequency width across xdB of each channel.

xdB Elimination band

Elimination band that is xdB from the bottom within the test band of
each channel.

6Ripple

Max-min level (flatness) within the test band of each channe.

Cross Talk

Difference in level between the positions that are xnm away in each
channel.

List of Parameters

Item

Parameter

Default

Setting Range

Unit

Channel Detection,

Nominal Wavelength

ALGORHYTHM

NOTCH(B)

PEAK / NOTCH(P)/ NOTCH(B)
/ GRID / GRID FIT

MODE DIFF

3.0

0.1 to 50.0

THRESH

20.0

0.1 to 99.9

TEST BAND

0.100

0.001 to 9.999

Bottom

Wavelength/Level

ON / OFF

XdB Width

Center Wavelength

ON / OFF

ALGORHYTHM

NOTCH(B)

NOTCH(P) / NOTCH(B)

THRESH

3.0

0.1 to 50.0

XdB stop-band

ON / OFF

THRESH

-10.000

-90.000 to 30.000

XdB Elimination ban

ON / OFF

THRESH

3.0

0.1 to 50.0

TEST BAND

0.20

0.01 to 99.99

Ripple

ON / OFF

TEST BAND

0.20

0.01 to 99.99

Cross Talk

ON / OFF

SPACING

0.80

0.01 to 99.99

TEST BAND

0.20

0.01 to 99.99

Appendix 6 Details of Optical Filter Analysis Function

Summary of Contents for AQ6376


































































































































































































































































































































































































































Search results

Summary of Contents for AQ6376

Reviews:

Related manuals for AQ6376

Brands by name

Popular brands

YOKOGAWA AQ6376, User Manual

Search results

Summary of Contents for AQ6376

Reviews:

Related manuals for AQ6376

Brands by name

Popular brands