YOKOGAWA AQ6376 User Manual Download Page 292

Page: 292 / 417

7-58

IM AQ6376-01EN

Selecting the Storage Medium

Press the

MEMORY

soft key to select INT (internal memory) or EXT (USB storage

media).

The file list of the selected medium appears.

Entering the Name of a File to Save

If you do not specify a file name, the files will automatically be assigned the name

LXXXX.LG7 (where XXXX is a serial number or saved date and time).

For instructions on how to create directories and sort the file list, see page 7-9.

For the auto file name, see section 7.3.

Using the rotary knob or arrow keys, move the cursor to the line in the file list

displaying NEW FILE.

Press the

FILE NAME

soft key. The text entry window and corresponding soft key

menu appear.

Follow the instructions in section 3.3 to enter a file name.

10.

Press the

DONE

soft key. The file name is confirmed, and the screen returns to

the previous level.

NEW FILE

7.10 Saving and Loading Logging Data

Summary of Contents for AQ6376


































































































































































































































































































































































































































Search results

Summary of Contents for AQ6376

Reviews:

Related manuals for AQ6376

Brands by name

Popular brands

YOKOGAWA AQ6376, User Manual

Search results

Summary of Contents for AQ6376

Reviews:

Related manuals for AQ6376

Brands by name

Popular brands