YOKOGAWA AQ6376 User Manual Download Page 40

Page: 40 / 417

3-1

IM AQ6376-01EN

Common Operations

App

Index

3.1 Description of Soft Keys

When you press a function key, the soft key menu (inside the screen) located on the right

side of the screen changes.

The soft key menus are designed to provide a certain level intuitiveness, with the

individual soft keys having particular forms which make them easy to understand.

Forms and Behavior

This is a normal soft key.

Press to execute its function immediately.

Contains a submenu.

Indicates that there is a submenu of additional items related to

the current item.

Press to display the submenu.

A separate window will be displayed.

Press to display a separate window in the screen for entry of

numerical parameters.

A submenu and separate window will be displayed.

Press to move to the submenu and display a separate window.

This softkey returns to the previous menu.

Press to display the previous soft key menu.

This is a selection soft key.

Select one of the soft keys connected with the black band.

When selected, the soft key is displayed in reverse video.

Several soft keys can be connected.

Chapter 3

Common Operations

Summary of Contents for AQ6376


































































































































































































































































































































































































































Search results

Summary of Contents for AQ6376

Reviews:

Related manuals for AQ6376

Brands by name

Popular brands

YOKOGAWA AQ6376, User Manual

Search results

Summary of Contents for AQ6376

Reviews:

Related manuals for AQ6376

Brands by name

Popular brands