YOKOGAWA AQ6376 User Manual Download Page 182

Page: 182 / 417

6-29

IM AQ6376-01EN

Analysis

App

Index

Analysis parameter setting screen

Note

See appendix 6, “Optical Filter Analysis Function” for a description of the optical filter analysis

algorithms and parameters.

WDM Filter Bottom Analysis

This is used if the optical filter is of a notch type rather than a pass band type.

Press

ANALYSIS

. The soft key menu for analyzing measured waveforms

appears.

Press the

ANALYSIS 2

soft key. The analysis function selection menu is

displayed.

Press the

WDM FIL-BTM

soft key. Analysis is performed, and the results are

displayed in a list. The analysis results display screen is switched with the

SWITCH DISPLAY

soft key.

Note

When zooming a waveform, if you click in the list of analysis results, the waveform of the

selected channel is displayed in the center of the waveform screen.

When changing the analysis parameters

Continuing on from step 3, press the

PARAMETER SETTING

soft key. The WDM

FIL-BTM analysis parameter setting screen is displayed. If a setting screen has

multiple pages, press the

NEXT PAGE

soft key to display the next screen.

Move the cursor with the arrow keys or soft keys, and enter a setting value with

the numeric key pad. To select a check box, align the cursor then press the

SELECT

soft key.

Press the

CLOSE WINDOW

soft key. The WDM FIL-BTM analysis parameter

setting screen closes, and the soft key menu returns to the previous stage.

Press the

ANALYSIS EXECUTE

soft key. Analysis is performed according to the

changed parameters, and the results are displayed in a list.

Note

See appendix 6, “Optical Filter Analysis Function” for a description of the optical filter analysis

algorithms and parameters.

6.9 Optical Filter Characteristics Measurement (Except Wavenumber Mode)

Summary of Contents for AQ6376


































































































































































































































































































































































































































Search results

Summary of Contents for AQ6376

Reviews:

Related manuals for AQ6376

Brands by name

Popular brands

YOKOGAWA AQ6376, User Manual

Search results

Summary of Contents for AQ6376

Reviews:

Related manuals for AQ6376

Brands by name

Popular brands