YOKOGAWA AQ6376 User Manual Download Page 298

Page: 298 / 417

7-64

IM AQ6376-01EN

Selecting the File/Directory

Select a file or directory using the

rotary knob

or the

arrow keys

. To move to

a directory, select the directory and press ENTER. The instrument moves to the

selected directory.

Select ".." and press ENTER to move up one directory.

Move one directory up
Directory

Displays the name of the selected file/directory

When setting a file name, the name is shown

Selecting All Files

Press the

FILE SELECT

soft key. The file selection menu is displayed.

Press the

ALL SELECT

soft key. All files are selected.

Press the

ALL CLEAR

soft key to clear the file selection.

Deleting a File/Directory

Select a file or directory to delete using the procedure in step 4.

Press the

DELETE

soft key. A deletion confirmation message appears.

Press the

YES

soft key. The selected file or directory is deleted. Press the

soft

key to cancel deletion of the file or directory. The screen returns to the previous

state.

7.11 Creating Files

Summary of Contents for AQ6376


































































































































































































































































































































































































































Search results

Summary of Contents for AQ6376

Reviews:

Related manuals for AQ6376

Brands by name

Popular brands

YOKOGAWA AQ6376, User Manual

Search results

Summary of Contents for AQ6376

Reviews:

Related manuals for AQ6376

Brands by name

Popular brands