YOKOGAWA AQ6376 User Manual Download Page 243

Page: 243 / 417

7-9

IM AQ6376-01EN

Saving/Loading Data

App

Index

Executing the Save

13.

To overwrite an existing file, move the cursor to the file name to be overwritten.

14.

Press the

EXECUTE

soft key. The save executes.

When the

RETURN

soft key is pressed, the data is saved. The screen returns to

the previous stage.

15.

When overwriting during a save, a confirmation message appears. Press the

YES

soft key.

To cancel the save press NO soft key.

File name

Creating a Directory and Sorting Files

Perform the following procedure if needed.

16.

Press the

MAKE DIRECTORY

soft key. The menu for creating directories is

displayed.

17.

Press the

DIRECTORY NAME

soft key. The text entry window and corresponding

soft key menu are displayed. Enter a directory name in the same manner as when

entering a file name.

18.

Press the

EXECUTE

soft key. The directory is created. Press the CANCEL soft

key to cancel creation of the directory.

19.

Press the

FILE SORT

soft key. The file sort menu is displayed.

20.

Press the soft key corresponding to the item by which to sort. The files are sorted

in ascending order by the selected item.

7.3 Saving/Loading Displayed Data

Summary of Contents for AQ6376


































































































































































































































































































































































































































Search results

Summary of Contents for AQ6376

Reviews:

Related manuals for AQ6376

Brands by name

Popular brands

YOKOGAWA AQ6376, User Manual

Search results

Summary of Contents for AQ6376

Reviews:

Related manuals for AQ6376

Brands by name

Popular brands