Yamaha MBK XMAX 2014, Service Manual

Page: 67 / 482

TIGHTENING TORQUES
2-20
Rear brake hose holder bolt (for
YP125R)
M6 2 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Rear brake hose/lead holder bolt
(for YP125RA)
M6 2 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Rear brake caliper bleed screw
(for YP125R)
M10 1 14 Nm (1.4 m·kgf, 10 ft·lbf)
Rear brake caliper bleed screw
(for YP125RA)
M7 1 6 Nm (0.6 m·kgf, 4.3 ft·lbf)
Rear brake caliper retaining bolt
(for YP125RA)
M10 2 27 Nm (2.7 m·kgf, 20 ft·lbf)
Upper handlebar holder bolt M8 4 23 Nm (2.3 m·kgf, 17 ft·lbf)
Front and rear brake master cyl-
inder holder bolt
M6 4 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Front and rear brake master cyl-
inder reservoir cap screw
M4 4 1.8 Nm (0.18 m·kgf, 1.3 ft·lbf)
Brake light switch screw M4 2 1.2 Nm (0.12 m·kgf, 0.87 ft·lbf)
Front and rear brake lever nut M6 2 10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Handlebar switch screw M5 4 2.3 Nm (0.23 m·kgf, 1.7 ft·lbf)
Grip end bolt M6 2 12 Nm (1.2 m·kgf, 8.7 ft·lbf)
Throttle cable and handlebar
switch screw
M5 1 2.5 Nm (0.25 m·kgf, 1.8 ft·lbf)
Throttle cable and throttle body
screw
M5 2 5 Nm (0.5 m·kgf, 3.6 ft·lbf)
Steering stem nut M20 1 120 Nm (12 m·kgf, 87 ft·lbf)
Upper ring nut M25 1 75 Nm (7.5 m·kgf, 54 ft·lbf)
Lower ring nut M25 1 See TIP.
Lower bracket pinch bolt M8 4 23 Nm (2.3 m·kgf, 17 ft·lbf)
Cap bolt M29 2 40 Nm (4.0 m·kgf, 29 ft·lbf)
Damper rod bolt M10 2 30 Nm (3.0 m·kgf, 22 ft·lbf)
Swingarm bolt M8 2 See TIP.
Rear shock absorber assembly
nut (upper side)
M10 2 32 Nm (3.2 m·kgf, 23 ft·lbf)
Rear shock absorber assembly
bolt (lower side)
M8 2 29 Nm (2.9 m·kgf, 21 ft·lbf)
Rear fender bolt M6 1 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Ignition coil bolt M6 2 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Ignition coil bracket bolt M6 2 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
ECU (engine control unit) bolt M6 2 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Lean angle sensor bolt M4 2 3.0 Nm (0.30 m·kgf, 2.2 ft·lbf)
Rectifier/regulator bolt M6 2 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Main switch bolt M6 2 10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Item
Thread
size
Q’ty Tightening torque Remarks
LT