Yamaha MBK XMAX 2014, Service Manual

Page: 30 / 482

INSTRUMENT FUNCTIONS
1-21
1. Turn the key to “ON”.
2. Check that the V-belt replacement indicator
comes on for a few seconds and then goes
off.
3. If the V-belt replacement indicator does not
come on, check the electrical circuit.
Refer to “SIGNALING SYSTEM” on page
8-23.
Multi-function display
The multi-function display is equipped with the
following:
• an ambient temperature display
• a battery voltage level display
• a fuel consumption display (average and in-
stantaneous consumption functions)
• an average speed display (which shows the
average speed since last set to zero)
• a warning message function
• a self-diagnosis device
Push the “INFO” button to switch the display be-
tween the ambient temperature display “Air”, the
battery voltage, the average fuel consumption
mode “Ave/Cons__._km/L” or “Ave/Cons __._
L/100 km”, the instantaneous fuel consumption
mode “Cons__._km/L” or “Cons__._L/100 km”,
and the average speed “Ave” in the following or-
der:
Air
→ →
Ave/Cons_ _._ km/L or L/100 km
→
Cons__._km/L or L/100 km
→
Ave
→
Air
For the UK only:
Push the “INFO” button to switch the display be-
tween the ambient temperature display “Air”, the
battery voltage, the average fuel consumption
mode “Ave/Cons__._ MPG”, the instantaneous
fuel consumption mode “Cons__._MPG”, and
the average speed “Ave” in the following order:
[Ambient temperature display]
This display shows the ambient temperature
from –10 °C to 50 °C in 1 °C increments.
The icy road warning indicator “ ” will flash
when the temperature is below 4°C.
The temperature displayed may vary from the
ambient temperature. Pushing the “INFO” but-
ton switches the ambient temperature display to
the battery voltage, the average fuel consump-
tion, the instantaneous fuel consumption and av-
erage speed modes.
[Battery voltage level display]
This display shows the battery voltage from 10.1
Volt to 17.9 Volt in 0.1 V increments.
The voltage displayed may vary from the battery
voltage. Pushing the “INFO” button switches the
ambient temperature display to the battery volt-
age, the average fuel consumption, the instanta-
neous fuel consumption and average speed
modes.
TIP
If the battery warning indicator “ ” flash and
warning message indicate “H BATT” or “L
BATT”, check the battery.
1. Ambient temperature
2. Average speed
3. Instantaneous fuel consumption
4. Average fuel consumption
5. Icy road warning indicator “ ”
6. Battery voltage
7. “TRIP/INFO” switch
C H
Air
Ave
Cons
1
2
3
4
5 6 7
Ave
Cons
C H
km
Trip
C H
km
Trip