![background image](http://html1.mh-extra.com/html/xyz-machine-tools/trak-2op-m11-mill/trak-2op-m11-mill_safety-installation-maintenance-service-and-parts-list_3848763095.webp)
91
XYZ Machine Tools Ltd
TRAK
2
OP
Installation, Maintenance, Service & Part List Manual
Figure 6.1.1b
8.
Place the motor on the shelf area above the mounting cavity. Disconnect the encoder and power
cables. See figure 6.1.1c.
Figure 6.1.1c
9.
Remove the four SHCS with lock washers attaching the motor and separate the plate from the
motor.
Installation of the X Motor
10.
Attach the mounting plate to the new motor. The round end of the plate faces toward the front of
machine when the cables face down. Torque up the M6 SHCS with lock washers to 9.5Nm (7ft-lbs).
11.
Place the motor on the shelf portion of the X motor casting above the motor cavity. Connect the
encoder and power cables.
12.
Maneouvre the motor into the cavity; taking care to not damage the cables. Fasten the motor
bracket with 3 SHCS with lock and flat washers. Do not tighten the mounting screws at this point
13.
Power up the machine. Go to service code 505. Note: the machine reads “0” for all axis.
14.
Press the “X” axis button (medium resolution) and rotate the hand wheel 2 or 3 revolutions and
stop at a motor index angle of 180°.
15.
E-Stop the machine
and, without disturbing the motor sprocket position, install the belt. Set the
tension such that the belt can be twisted no more than 45° (do not over tighten). Torque the M6
motor bracket screws to 9.5Nm (7ft-lbs) and re-check belt tension.
Summary of Contents for TRAK 2OP M11 Mill
