![background image](http://html1.mh-extra.com/html/xyz-machine-tools/trak-2op-m11-mill/trak-2op-m11-mill_safety-installation-maintenance-service-and-parts-list_3848763006.webp)
2
XYZ Machine Tools Ltd
TRAK
2
OP
Installation, Maintenance, Service & Part List Manual
•
Always wear the appropriate personal protective equipment, including safety glasses and
safety shoes.
•
Do not wear loose fitting gloves whilst operating this machine as they could easily get
caught in moving parts.
•
Never wear rings, watches, long sleeves, neckties, jewelry, or other loose items when
operating the machine.
•
Keep your hair away from moving parts. Wear adequate safety head gear.
•
Never operate any machine tool after consuming alcoholic beverages, or taking strong
medications, or while using non-prescription drugs.
•
Carry out a COSHH risk assessment and use the correct protection equipment, e.g. barrier
cream/latex gloves, to prevent harm from items such as cutting fluid, lubrication oil and
other substances used on the machine.
•
Never run the machine with the enclosure door open
•
Observe and understand the warning and safety information labels affixed to this machine.
•
Do not attempt to tamper with or override any guarding/safety device fitted to the machine.
•
Keep the working area clear and remove all tools (spanners etc.) from the machine before
you start the machine running. Loose items can become dangerous flying projectiles.
•
Stop the machine spindle and ensure that the CNC control is in the STOP mode:
o
Before changing tools.
o
Before changing parts.
o
Before you clear away the Swarf, oil or coolant. Always use a chip scraper or brush.
o
Before you make an adjustment to the part, vice, coolant nozzle or take measurements.
o
Before you open guards. Never reach around a guard to gain access to the part, tool, or
fixture.
•
Do not use compressed air to remove swarf or clean the machine.
•
Keep work area well lit. Ask for additional light if needed.
•
Be aware that machine parts can move unexpectedly, so do not lean on the machine while
it is running.
•
To prevent slippage and personal injury, keep the working area around the machine dry and
clean. Ensure there is no swarf, oil, coolant and obstacles of any kind around the machine.
•
Avoid getting pinched in places where the spindle, table or guard doors create "pinch
points" whilst the machine is in motion.
•
Securely clamp and properly locate the workpiece in the vice or in a fixture. Use proper tool
holding equipment.
•
Use the correct tooling for the process being undertaken. Never use damaged or worn tools
and ensure the correct cutting parameters (speed, feed, and depth of cut) are used in order
to prevent tool breakage.
•
Prevent damage to the workpiece or the cutting tool. Never start the machine (including
the rotation of the spindle) if the tool is in contact with the part.
•
Avoid large overhangs on cutting tools when not necessary.
•
To prevent fires keep flammable materials and fluids away from the machine, hot swarf and
workpieces.
•
Always turn off and lock-out power at the main electrical panel before servicing the machine
•
Always turn off and lock out the air supply and depressurise the pneumatic system before
servicing.
Summary of Contents for TRAK 2OP M11 Mill
