![background image](http://html1.mh-extra.com/html/xyz-machine-tools/trak-2op-m11-mill/trak-2op-m11-mill_safety-installation-maintenance-service-and-parts-list_3848763103.webp)
99
XYZ Machine Tools Ltd
TRAK
2
OP
Installation, Maintenance, Service & Part List Manual
Figure 6.5c
See 27520 for Reference
5.
Remove the oil line that is connected to the ball nut located on the left side of the head, as well as
the cushion shown in figure 6.5d.
Figure 6.5d
6.
Remove the five SHCS that secure the ballnut to the X-axis yoke.
7.
Remove the four SHCS that secure the bearing cap found opposite to where the cushion seats, also
shown in Figure 6.5c.
8.
Slide the ballscrew out the left hand side window.
9.
Remove the bearing housing from the right side of the X-axis casting, refer Figure 6.5c disassemble
the seal, bearings and the inner spacer.
X-axis Ballscrew Installation
Summary of Contents for TRAK 2OP M11 Mill
