![background image](http://html1.mh-extra.com/html/xyz-machine-tools/trak-2op-m11-mill/trak-2op-m11-mill_safety-installation-maintenance-service-and-parts-list_3848763089.webp)
85
XYZ Machine Tools Ltd
TRAK
2
OP
Installation, Maintenance, Service & Part List Manual
5.11.3.7
Code 327: Display Memory Check
This service code is used to check the amount of free memory available from system RAM or a USB device.
This can be useful for troubleshooting any issues where memory may be a factor, such as system slowing
down, or intermittently not responding. Press the DRIVE SPACE button to check the amount of free space
on the system drive as well as removable devices such as USB flash drives. A service technician may ask
you to take note of these screens while troubleshooting certain computer related issues.
5.11.3.8
Code 342: Test Light Indicator
When service code 342 is enabled, the following is displayed in the bottom right-
hand corner of the screen. These test light will aid in understanding problems
associated with running G code programs that may not be running smoothly.
This will identify if the blocks per second rate for the machine has been
exceeded.
The upper 9 squares will indicate how much of the buffer is loaded with moves,
in 10 percent increments. When they are all green, the buffer is between 90
and 100% full. When the top one is black and the rest are green, the buffer is
between 80 and 90% full. The example at the right shows the buffer is
between 70 and 80% full. When it gets below 70% the lights turn yellow and
below 40% they turn red.
The blue light indicates that the binary file is still being processed. It will go to black when processing is
done.
The red light, second from the bottom goes red when moves are being processed at or above the maximum
system BPS rate. The bottom light goes red if the slave ever takes longer than 1ms to execute. This
should normally only occur if “real-time” logging is enable on the slave.
5.11.3.9
Code 521: Check Control I/O
This service launches a separate application which allows the user to check the various inputs and outputs
on the machine. It is only used for troubleshooting purposes.
The TMX, ProtoTrak application software shuts down once this application is launched. Press the X in the
upper right hand corner to close this application, then cycle power to restart the TMX, ProtoTrak software.
The
FRONT PANEL
screen tests critical keys, E-stop and servo on buttons on the front panel:
The
INPUT
screen allows you to check all the inputs on the control. Triggering an input, by pressing a
switch for example, will highlight the corresponding white box.
Summary of Contents for TRAK 2OP M11 Mill
