![background image](http://html1.mh-extra.com/html/xerox/document-centre-400-series/document-centre-400-series_user-manual_3905278029.webp)
17
Setting Up
2
2.1 Connecting Cable (Parallel/Serial Interface)
Serial interface connection
The procedure for connection by serial interface is explained here.
• When connecting to a host device using serial interface, a RS-232C cable is
required. This cable is not provided as an option by our company. Refer to
"Appendix B.2 Serial Interface" to prepare the cable (EMI product).
• The serial port is set to inactive when it is shipped out. Change it to active after the
cable is connected.
Insert the interface cable connector to the
serial interface connector and secure it.
For the interface cable, use the
shielded cable (EMI product) made for
your host device.
Connect the other end of the interface cable
connector to the host device.
Switch on the printer.
Follow the procedure on the next page to activate the serial port from the printer control
panel:
When messages other than "Ready to Print/Fax" is displayed after Step 10 on the
next page, refer to "7.2 Messages".
Summary of Contents for Document Centre 400 series
