Xerox Document Centre 400 series, User Manual, Page: 100 / 185

88
5
5.2 Mode Menu Items
Menu Item Explanation
Output Tray Sets to output with printed page facing up or down.
The candidate values are as follows:
• Centre Tray (Default)
Outputs with the printed side facing down. Also, when printing double-sided pages, the
odd-numbered pages will be facing down.
• Side Tray*
Outputs with printed side facing up. In addition, during double-sided printing, the odd-
numbered pages will be facing down.
• Stacker Auto*
• Stacker Tray 1 to Stacker Tray 3*
• Mail box (Bin 1) to Mail box (Bin 10)*
• The values set are changeable by commands.
• The setting takes on default value when the NVRam is initialized.
Override Size Turns the Override Size on and off.
The candidate values are OFF and ON. Default is OFF.
• The Override Size feature allows paper size switching if there is a paper-size
mismatch when the requested paper size is not available in the printer.
Enabling this feature will allow the job to be printed on a best-fit paper
size. However, there might be an image loss while using this feature.
• To ensure minimal image loss when the job is printed on another paper size,
the selection of the best-fit paper size is based on the following rules:
1. switching between A4 and Letter
2. switching between B4 and Legal
3. switching among 8K, A3 and Ledger in the following sequence:
- 8K to A3 to Ledger
- A3 to Ledger to 8K
- Ledger to A3 to 8K
• When this feature is not enabled, users will have to load the requested
paper size.
*optional