![background image](http://html1.mh-extra.com/html/xerox/document-centre-400-series/document-centre-400-series_user-manual_3905278098.webp)
86
5
5.2 Mode Menu Items
Menu Item
Explanation
Resolution
Sets the resolution of the printer.
The candidate values are 400 and 600. Default is 600.
Resolution refers to the number of dots per inch (dpi) of toner that the
printer places on the page. The higher the resolution, the better quality
(clearer) the page.
For best results, use 600 dpi for graphics and fonts that are designed
specifically for printers that print at 600 dpi resolution. For faster printing
and smaller memory requirements (and a lower quality), use 400 dpi
instead.
Tray
Sets the paper tray that supplies paper.
The candidate values are as follows:
• Auto-Tray (Default)*
Supplies paper from a selected tray among trays which have been loaded with the paper
size set in the "Paper size" selection. However, the bypass tray (BPT) cannot be set for
automatic paper supply. It is the factory default if the 1-tray or 3-tray module is installed.
• Tray 1
Supplies paper from tray 1. This is the factory default if the 1-tray or 3-tray module is not
installed.
• Tray 2*
Supplies paper from tray 2. This value is displayed when the 1-tray module is installed.
• Tray 3/HCF 1*
Supplies paper from tray 3. This value is displayed when the 3-tray cabinet is installed.
• Tray 4/HCF 2*
Supplies paper from tray 4. This value is displayed when the 3-tray cabinet is installed.
• Bypass Tray*
Supplies paper from bypass tray (BPT). In this case, the paper size specified in "Paper
size" selection must be loaded in the BPT. This value is displayed when the BPT module
is installed.
• When Auto Tray is selected and the same size of papers are set in the same
direction in multiple trays, the paper tray retrieved will be in the order of
Tray 1, Tray 2, Tray 3 and then Tray 4.
When High Capacity Feeder (HCF) is installed, the paper tray retrieved
will be in the order of HCF1, HCF2, Tray 1 and then Tray 2.
• The values set are changeable by commands.
• The setting takes on default value when the NV/Ram is initialized.
• When Tray 1 to Tray 4 are selected, the “Paper size” selection cannot be
set as the paper loaded in these trays become the paper sizes.
• When Bypass Tray is selected, press
to move the cursor to “Paper
size”, then press
or
to select BPT size.
• When Bypass Tray is set and wrong paper size is confirmed, a message
requesting the specified paper size will appear in the control panel.
*optional
Summary of Contents for Document Centre 400 series
